My shopping cart My cart:
skip to the main content area of this page

XM-RM735 - professional

1 Combo Gigabit SFP and 10/100/1000 Mbps UTP Rapid-Matrix Ethernet Test Module


XM-RM735 is 1 Combo Gigabit SFP and 10/100/1000 Mbps UTP Rapid-Matrix Ethernet Test Module with high test quality and reliable test result.

Specifically designed for NuStreams chassis (such as NuStreams-2000i and Nustreams-600i), XM-RM series modules supports hot swap, multi-user operation, and Rapid- Matrix, a technology that can generate multi-stream traffic simultaneously with different kinds of frames/packets with almost any required protocol headers, tags and payload for each port.

XM-RM series can be divided into Standard and Professional types. The advantage of Standard XM-RM series is that there are more test ports on each module. The cost per test port is lower for mass-production scale DUT tests. Having similar features like Professional XM-RM series, Standard XM-RM series, with less capacity, provide reliable DUT test results at mass-production line.

NuStreams-2000i and NuStreams-600i chassis with XM-RM Series test module cards can perform synchronized tests to ensure the test precision. Also, the time consumed for all DUTs’ multi-task testing will be shortened dramatically.

Along with the advanced technology mentioned above, Xtramus also provides several software applications, such as NuWIN-RM, APMPT-4, and other ongoing softwares complied with RFC-2544, RFC-2889 and etc. XM-RM series can test the network equipments in conformance, performance and stress tests.

Test DUT by NuStreams Chassis and Module Cards

System features

  • Supports 10/100/1000 Mbps Ethernet test equipment
  • Wirespeed hardware based traffic generation and analysis
  • High test performance with low-cost testing ports.
  • Stream based wire speed layer2~3 traffic load generation
  • RFC 2544/2889 test suite
  • Wirespeed traffic capture with programmable filter and trigger criteria
  • High-precision performance measurement of throughput, latency, loss, sequence and mis-ordering error
  • Remote management of testpoints
  • Validation with negative and abnormal test conditions per packet byte
  • Real-time statistics for each port, including transmitted/received frame for VLAN, IPv4, IPv4 fragment, IPv4 extension, ICMP, ARP, total bytes/packets, CRC, IPCS error and over-and-under size frames.


  • Test module for Gigabit Ethernet device.
  • Test module for quality control of network device in mass production line.
  • Test module for new design network product in R and D laboratory that need report of precise statistics and result.
  • Apply to Telecommunication room, R and D laboratory, Data center, etc.

Return to All Items